home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Xenosoft 2
/
Xenosoft 2 (Game collection)(1994).iso
/
games
/
strsquad.arj
/
STRSQUAD
/
SYSTEM.TXT
< prev
next >
Wrap
Text File
|
1993-09-19
|
2KB
|
41 lines
--------------------------------------------------------------------------
Computer Configuration/System Information
The following type of system is required to play Strike Squad:
IBM-PC/AT 16 Mhz '386 or faster (or 100% compatible system)
2 MB Memory
Hard Drive
256 Color VGA graphics
Mouse, 100% Microsoft (or Logitech) Compatible
Available Memory above the 640K memory should be configured as XMS memory
not EMS memory as Strike Squad requires 2 MB XMS memory for the digitized
sound effects and music on Adlib, Sound Blaster, and compatible sound
boards.
You should read the game manual "Troubleshooting" section for
information on TSRs and possible conflicts. Running the HELP
program and selecting Memory Check will display available memory
detected and you may consult your computer or DOS manual for
further information on configuring your machine appropriately.
The HELP program features a boot disk maker to create a "clean"
DOS 5.0 boot disk with the optimal memory available.
Using STACKER or other disk compression programs may preclude use of
this boot disk and you may need to install Strike Squad into a non
compressed portion of your hard drive.
The program SHARE has been shown to cause conflicts with our install
program. If installation problems occur and SHARE is being loaded
on your system bootup, then you may have to alter your configuration
files or use the HELP program to create a boot disk (if using DOS 5.0).
Memory programs such as QEMM, 368MAX, etc could possible cause
conflicts if not properly configured. If problems exist in playing
the game, try editting CONFIG.SYS file, AUTOEXEC.BAT file, or
create boot disk to load without these to narrow down problem
cause(s).
----------------------------------------------------------------------
END OF FILE